{"id":23076,"date":"2019-05-23T09:00:50","date_gmt":"2019-05-23T07:00:50","guid":{"rendered":"https:\/\/www.mecolpress.com\/?p=23076"},"modified":"2021-02-12T12:47:46","modified_gmt":"2021-02-12T11:47:46","slug":"mecolpress-hydraulic-presses-features-and-advantages","status":"publish","type":"post","link":"https:\/\/www.mecolpress.com\/en\/mecolpress-hydraulic-presses-features-and-advantages\/","title":{"rendered":"Mecolpress hydraulic presses: features and advantages"},"content":{"rendered":"

[vc_row][vc_column][vc_column_text]Mecolpress boasts a wide range of hydraulic presses of different tonnages, ideal for the realization of hot forged parts with complex geometry. The presses are equipped with a Mecolpress proprietary software, \u201cCalipso\u201d<\/a>, that allows to monitor the entire productive cycle of the hydraulic press according to numerous parameters.[\/vc_column_text][vc_custom_heading text=”Features of hydraulic presses” use_theme_fonts=”yes”][vc_column_text]Hallmark of every hydraulic press<\/strong> is the programming flexibility<\/strong>. Since the ram and the punches are independently controlled by hydraulic cylinders, this allows to carry out some corrections during the working cycle to remedy some eventual defects by acting on the movement of a single component through software.<\/p>\n

Hydraulic presses can hot forge<\/strong> different materials including brass, copper, aluminum, steel and titanium alloys.[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_custom_heading text=”Range of Mecolpress hydraulic presses” use_theme_fonts=”yes”][vc_column_text]Mecolpress offers to its customers a wide range of presses with a die closing force that currently goes from 100 to 500 tons<\/strong> and a minimum punch force of 30 tons that can arrive till 350 tons.<\/p>\n

Moreover, our hydraulic presses are provided with a loading arm for warm billets and with an unloading arm for the forged part. Based on the customer\u2019s needs concerning the layout for the hot forging production line, the arms can be placed on the same side and working in sync, otherwise placed on the opposite sides and working autonomously. Thanks to \u201cCalipso\u201d<\/a> software developed by Mecolpress and installed on every hydraulic press, the press can detect which parts are not in compliance with the programmed parameters, and these parts will be automatically separated from the others by the unloading arm<\/strong>, flowing into a box for wastes.<\/p>\n

This management allows to optimize the checks and to save time on the productive cycle.<\/p><\/blockquote>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_custom_heading text=”Possible configurations of a hydraulic press” use_theme_fonts=”yes”][vc_column_text]Mecolpress hydraulic presses<\/a> can be set up in a custom-made way according to production needs expressed by the customer. For example, one or two punches can be placed with an entry angle different from the classic 90\u00b0, allowing the realization of particularly complex shapes such as, for example, Y-junctions and filter bodies.<\/p>\n

Further possible configurations are:<\/p>\n