HOT FORGING PRESSES INTERVIEW WITH MECOLPRESS
Company manufacturing hot forging presses.
We report an interview of the digital magazine Easy Engineering of 28 April 2020.
Established in 1969, MECOLPRESS was founded as a manufacturing company of mechanical presses for brass components hot forging. Up to today, Mecolpress has developed and installed more than 1.950 presses, at over 400 customers all around the world, used for forging brass, aluminum, copper, titanium, steel. The current production site in Flero, in the highly productive area of Brescia, takes up a 30.000 square meters surface, 10.400 of them are covered and employees 55 people, reaching a turnover in 2018 of 11.5 million Euro.
In 2019, in occasion of EMO exhibition in Hannover, Mecolpress officially presented the new series of continuous and discontinuous cycle eccentric presses, the HEAVY series.
Easy Engineering: What are the main areas of activity of the company?
MECOLPRESS: At the beginning all efforts were concentrated on brass hot forging field; in the time, also through the acquisition of the historical brands Osterwalder and Dellavia in the screw presses section, the variety of machines that we design and produce is now so wide and complete to satisfy the most different requirements of the customers: for each specific material, shape and quantity to be forged, we are in the position to offer the most suitable solution.
Mecolpress is today the only company among the manufacturers of presses for the hot forging of brass, aluminum steel, copper, titanium, with a so complete production program.
Our present production program consists of:
- TDS: direct drive with electrical servomotor;
- Dellavia and Osterwalder: Traditional disc friction.
PG Knuckle joint presses
for calibration and coining of parts.
Presse Meccaniche Eccentriche
- SOV and SEO/F: for the vertical hot forging;
- SEO and HEAVY: for forging with horizontal cores, in single or continuous cycle.
for forging brass and aluminum parts without flash.
- PO: single station;
- S: multiple station, rotary table with hydraulic motor;
- E: multiple station, rotary table with electric motor.
In addition, Mecolpress is particularly active in after-sales service. The heart and pride of Mecolpress is its large spare parts warehouse, which is able to supply accessories or spare parts for machines produced fifty years ago. For this reason, in addition to the sale of machinery, there is a wide activity related to the service and supply of accessories (such as tools, arms, spare parts, etc..).
E.E: What’s the news for 2020 about new products?
MECOLPRESS: At the end of 2019 Mecolpress presented at EMO fair in Havvore a brand-new series of eccentric presses, named HEAVY, which defines a new standard for the hot forging of brass.
A machine concept that offer highest durability and reliability together with an innovative software system that allows the maximum control on the process and the a very easy operation.
E.E: What are the ranges of traded products?
MECOLPRESS: As a manufacturer with an own wide range of products, the additional equipment that we simply trade is limited to ancillary machines, to offer complete forging lines (delivering a finished part from the input of a raw material bar) to those customer that prefer to have a turn-key plant from one source.
Typical traded machines are: billets heating furnaces, forging dies, sand blasting machines.
E.E: At what stage is the market where you are currently active?
MECOLPRESS: Since our machines are dedicated to a very wide panorama of applications (from house building to automotive, from gas control to biomedical) there are always new developments in these sectors.
This is for us very stimulating because we are constantly involved in the design of new solution, to support our customers with the most suitable equipment to manufacture parts that are chancing in the shapes, in the alloys and in the technical requirements.
E.E: What can you tell us about market trends?
MECOLPRESS: In the past our customers were mainly subcontractors, producing many different kinds of parts for the most differentiated OEMs. We see now more and more companies that are interested in bringing back into their own activity the hot forging process, to have full control over the entire production line. And also, the subcontractors that still exists, are increasing in size, in capability, and in specialization: they are requested to be much more accurate, reliable, more flexible and fast in changing production and technologies.
For these reasons, the machines that both our customer types (the subcontractors and the OEMs) need, are machines that can easily switch from one application to the next, and that can record and control really in depth every aspect of the production process. The user is therefore becoming more an engineer, that study and program the process in advance and then let the machine run autonomously, instead of an operator that has to stay full time at the machine, checking and adjusting the settings.
E.E: What are the most innovative products marketed?
MECOLPRESS: As above indicated, one of the most innovative products that we offer today is the new range of Heavy presses.
In parallel to this, we are widening the offer for the ME hydraulic presses which are designed to forge net shape parts. These machines are extremely versatile, can communicate in two directions with the company ERP software to exchange production data, recipes, preventive maintenance information. And are also able to automatically detect a non-conforming product and separate it from the good ones. This makes the ME forging presses a fully automatic system, that does not require operators to work but also does not need regular presence of quality control staff to check periodically the output.
E.E: What estimations do you have for 2020?
MECOLPRESS: At the end of 2019 we planned a very aggressive budget of sales for the 2020, and supported it with several activities and strategies, from the participation to many international shows, to the production of machines for stock, to grant to our customer very fast deliveries.
Unfortunately, due to the Covid-19 virus spreading, many commercial activities had to be reprogrammed or postponed. We are now investigating the world markets to assess what will be the customers’ propensity to invest for the remaining months of this year. We are very optimistic that we will in any case be able to reach most of our targets also thank to the availability of machines in our workshop, which is allowing us to complete deliveries in this year of machines ordered in the second and third quarter.
Optimize the production with Mecolpress training courses
Mecolpress makes available to its customers a training service against payment whose aim is to provide useful information to the staff in charge of the presses in order to use the machines in the best performing way and to optimize the production.
Read this article to discover how training could help a customer of ours to reduce of 50% the maintenance interventions.
The problems of customer Alfa
Time ago a customer of ours, that we will name Alfa, contacted us because of his interest in custom-made training courses for forging machines proposed by Mecolpress. The reasons why he decided to activate the course were several.
First of all, the company employees were not adequately trained and could not use the forging machines in the best way. This implicated a frequent request of assistance from Mecolpress by the customer, and even if our intervention was very prompt, the company had to face up to the interruption of the productive process and to the additional costs connected to the customer care service.
In addition, the company hired new young but still not-expert personnel, however definitely open to technologic innovations and able to use the informatic devices of production machineries.
By their side there was also experienced personnel, working in the company for many years, with greater familiarity with forging techniques, but with some difficulties to approach their selves to the new digital techniques. Persuading them to change method was not so easy, because the long experience matured during years with their procedures.
In closing, the Alfa customer has at his disposal a various set of machines including dated presses, trimming presses, mechanical presses and a new hydraulic press, just bought.
For all these reasons, our customer has felt the need to take advantage of a new custom-made training course that can teach to the operators how to use the machines in the most performing way and to obtain the maximum output with minimum effort.
Mecolpress training course
According to the needs expressed by our customers we have planned a custom-made training course that takes account of forging machines in the company and of the type of forged parts.
The course is structured as follows:
- Introduction to hot forging;
- Explanation of drawings and simulation program in support of parts to be forged;
- Parts forging in the factory with an entirely devoted machine;
- Answers to questions of the personnel, detailed studies and explanations on problems regarding the production.
In particular, during the course very relevant matters were debated, such as die and process preliminary analysis, setting of specific parameters, driven setting of the hydraulic presses for parts with flash and without flash and analysis of output with simulations.
Result of the course
Our customer was particularly satisfied with our custom-made training course because of the obtained result.
Indeed, the personnel could acquire an increased competence regarding hot forging, both generally and specific, related to the company production type.
Moreover, the course has contributed to reinforce the team spirit among employees, that is of high importance to create a working environment based on collaboration. Indeed, activities of this kind contribute the personnel to interact more, to better work as a team and also to better face with the daily difficulties.
After our training our customer has decreased drastically the number of service requests against payment. Indeed, the operators in charge of machines can now use better the presses with a lesser wear and they can carry out in autonomy some activities of ordinary maintenance, without the need of Mecolpress technicians.
For further information about Mecolpress training courses, please send an e-mail to: sales@mecolpress.com.
