Are you doubtful between mechanical press and hydraulic press?
Are you doubtful about the press to choose? Mechanical press or hydraulic press?
Ask to Mecolpress, you will have no more hesitations!
You have just got a new commission and you need a new press for hot forging. Are you sure that you can identify the press that best suits your needs?
Typical request
It often happens that a Customer, or potential one, comes to us with the part he desires to forge. Usually it’s about complex situations, very far from standard applications. That’s exactly why the Customer asks for our help and support.
If the Customer is not a newcomer in the forging world, he usually arrives in Mecolpress with clear and straight idea about the type of press he wants. But very often it happens that he will change his view after having the possibility to get in contact with our forging know-how!
You ask for a mechanical press but you need an hydraulic one!
For example, some weeks ago two different customers came to visit us bringing some sampling to be forged. They were sure to ask a quotation for a mechanical press, they realized instead that the right machine for their situation was a hydraulic one!
Both our customers had the chance to test new dies, only 4 hours were needed for the preparation and installation of the dies and to run some tests. Even though the furnace was not the best one for their kind of production, because it’s a furnace that Mecolpress uses for testing, the machine gave a flash-free part in only 4 hours, with a saving of about 30% of material and with a quality definitely superior than the one they could achieve using a mechanical press.
Moreover, it is important to take into consideration the limits of the mechanical press:
- Since the part is not balanced, the mechanical press should use all its possible force to forge it.
- Working in this way the risk to run into damages or machine breakdown becomes greater.
On the contrary, The ME hydraulic press can forge the part better. The forged parts which required more force used however less than 200 tons on a punch, therefore it consists of a forces distribution that is totally different compared to the traditional mechanical press.
Often the customer is skeptical towards the hydraulic press, but just because he is not familiar with it!
Find out more about the hydraulic presses
The hydraulic presses patented by Mecolpress are suitable for the hot forging of standard parts or special parts in brass and aluminum. The dies closure force is higher than the one of the traditional mechanical presses and the independent and controlled movements of the ram and of the extruders allow to hot forge also complex parts without flash.
These are oleodynamic presses provided with coring tools combinable till to a maximum of 5 punches (4 horizontal and one vertical) suitable for the hot forging of brass, aluminum, copper and other materials.
Compared to the traditional mechanical presses these presses have different advantages, including:
- Reduced vibrations and noises.
- No foundations are required.
- Higher flexibility: there are no mechanical connections between tooling and ram; this implicates that you can decide speed, force, position and movement sequence for each punch independently. The result is the possibility to decide how to let the material flow, this helps the part production with a better quality level.
- Ease of tooling: easy access to the forging area and automatic adjustment of punches strokes from the panel that cancels the mechanical adjustment on the spines (for example insertion of spacer).
- The press is easy and intuitive to be used even without a great experience in the forging field. Together with the machine a lifelong service via teleservice and phone assistance is provided.
Some practical examples about the choice for a hydraulic press.
- Hydraulic press ME150: this is a quite small machine and often we suggest it to who has no experience in the hot forging field.
- Hydraulic press ME 250: let’s get serious!
Example: are you undecided if you want to buy a 400t mechanical press or a ME250 hydraulic press?
If you have small and easily to force parts to be produced in huge quantities and in series maybe the choice of a mechanical press is the most suitable, but if you have a part that is lightly more complicated, probably you need an hydraulic one. In this case, we are sure that a test here in Mecolpress will remove any doubt!
- Hydraulic press ME from 450tons onwards: This press is more efficient, more cost-effective, it allows to save material, to increase the productivity, it is more convenient, more silent, no foundation pit is required and despite of what our competitors affirm, the energy consumption is not high. In fact, this consideration comes from the fact that just the installed power is taken into consideration.
Did you carry out a forging simulation and forging tests?
In order to choose the right press it is surely helpful to carry out a forging simulation, our technical office can support the customer during the process for choosing the machine with a software analysis of material flow, in order to carry out a sort of “virtual pre-acceptance” of the plant.
Once that the forging simulation is successfully over, then the next step is a real test in our factory. Indeed we have available machines devoted for the forging tests, this is a very important aspect for the customer that often gives him the possibility to invest in a more aware and motivated way. Touching the forged part doesn’t leave no room for doubt!
Being able to satisfy and fully understand the customer needs, to demonstrate and propose our most suitable solutions with concrete tests thanks to the machines and toolings we have available in Mecolpress for the forging tests is for us matter of pride.
#MECOLPRESSCHRISTMAS2020
Usually in Mecolpress, to celebrate Christmas, we express each other good wishes with two special events: a dine-out evening that allows us to share special moments, stories and anecdotes, and a toast in production on the last day of work accompanied by the speech of our president.
This year obviously it will not be possible to do any of this, so what?!?!
What can we say about 2020 coming to an end?
Certainly the year we are leaving behind is a year that we will remember because of Covid that has not spared any country in the world.
If we are to talk only about the Mecolpress reality, we can now consider ourselves lucky in terms of health. And also from a work point of view the year is ending without major deviations from the previous year even if we had foreseen a very aggressive budget that aimed to different results, we can say that the current situation caused by Covid has not put us in particular difficulties as may have happened for other types of companies or other production sectors.
This year it was not possible to carry out some technical interventions in some countries, all the trade fairs to which we were registered could not take place, and we had to postpone visits to our mainly foreign customers.
But we’ve all learned to use more digital tools, which allow us to meet remotely.
We have even tested entire forging lines remotely, and more and more customers have chosen to use our calipso software for forging control.
But above all we had the opportunity to verify with pleasure and satisfaction, that our customers from all over the world (some even newly acquired!) have renewed their confidence despite the physical distance.
What interesting news we have implemented internally in 2020?
Speaking instead of the Mecolpress reality inside we can say that we have finished most of the works planned in the new Shed 5, specifically the most interesting thing we implemented was the purchase and starting up of a powerful induction oven. This oven is for our exclusive internal use and allows us to perform forging tests not only for brass and aluminum pieces, but also for steel pieces. Steel in fact needs higher temperatures than other materials. Thanks to the work that our technical engineer specialized in hot steel forging is doing, we are investing a lot in the production of machines for this material.
We realize more and more that for the customer to have the proof, to see the piece to must be forged, concretely made by a machine that we always have available to carry out forging tests, is very important!
Often customers come to us who have to make even complex pieces, with many doubts and perplexities. It is of great satisfaction for us to show them how the Mecolpress press that we recommend to them, after study by our technical office that also uses a forging simulation, can make their piece with higher quality requirements. And it’s that added quid that has often allowed us to make a difference.
What we expect in 2021?
The spread of Covid-19 obviously weighs on any forecast or programming. But we hope to reschedule many businesses that have been postponed in 2020. We are currently investigating global markets to assess how much customers will be able to invest in the coming months.
However, we are full of preparation and positivity, our sales force is working to propose solutions suitable for needs that may be changing.
And above all we are on the piece!
Mecolpress Best Wishes
Since it is not possible to exchange greetings as usual, we just have to do them online, but with our hearts. We sincerely hope you can spend a serene Festivities, this is the wish we address as well to our employees and their families, our customers and collaborators.
Because Mecolpress is made by all of you, of people who work every day, collaborate, give us confidence and make Mecolpress not only a company but a large family.
In this regard we ask you to share with us selfies, a wish, a phrase, or a toast … to share the wishes with us, DISTANT BUT UNITED:
Post your message on the social networks and mention @mecolpress
Insert the hashtag #MecolpressChristmas2020 #WeAreOnThePiece
Our social channels:
With or without flash?
When you have to face a forging project for a new piece, the first step to take is to make a simulation by means of forging software and to decide whether to set the simulation with or without flash.
With or without flash?
Start with the forging simulation
In general terms we can affirm that thin-thickness pieces and material movements in different directions or with sudden dimension changes can give defects in flash free forging.
If the geometry is uniform and the section variations are contained, you can think of dealing with a flash free project.
It is true in all cases that starting a flash free project can allow evaluations that push to optimize the geometries of the piece (if it is possible to operate on the outer geometry) or it can drive the next analysis with flash.
A first flash free step involves certainly reduced calculation times and allows an evaluation of the punches forces and dies closure that can approximatively be considered valid in general.
Suitable for forging with flash
Here above a geometry that very hardly is fit for a flash free forging
Suitable for flash-free forging
In this case, the success of a flash free project is very likely.
Is the press you have chosen suitable for forging your piece?
Secondly, it is necessary to roughly estimate if the analyzed piece is workable for the considered machine model.
At this stage you need to have a database showing the average pressures on half dies and on punches.
For this purpose, as the simulation history evolves, it is very useful to keep an Excel file in which the results in terms of forces are summarized in average pressures on half dies and punches.
This procedure allows you to understand at a glance if the result of a simulation can be considered valid or may be affected by calculation errors. Obviously, more cases are available more is likely to have reliable results, because the geometry of the piece strongly affects the force on each element of the die and therefore in the evaluation it is necessary to consider pieces with similar morphological characteristics.
Once the geometry of the piece is drawn, including the desired corings, it is necessary to obtain by subtraction the geometry of die and punches.
Firstly, however, the shape has to be scaled to take into consideration the fact that the formation occurs at a high temperature, while the drawing dimensions are valid for pieces at ambient temperature.
The typical brass value for forging is 1.012, while in the case of aluminum the factor 1.010 is generally used. With an Excel sheet, you can therefore estimate the diameter and length of the billet of first attempt.
For flash-free forging choose the hydraulic presses
Mecolpress hydraulic presses of ME series are the best solution for the forging of a part of brass, aluminum, or of other materials, without flash.
The closing force of the dies, higher than the one of the traditional mechanical presses, and the independent and controlled movement of the ram and of the extruders allow the hot forging of even complex parts without flash.
ME hydraulic presses have proved to be unbeatable in the forging of parts having some complexities.
For example, if you have to forge gate valves, our ME presses allow to forge these valves totally without flash, with very high precision, without the risk of defects caused by brass flow in the die.
In addition, even the production is higher compared to the one allowed by the traditional method with eccentric mechanical presses and with bell tool.
A ME350-4G240 hydraulic press, for example, can forge two-inch gate vales without flash, without the help of special tools, and with a productivity of about 800 parts/hour.
Another significant and practical example is that with a ME hydraulic press you can hot forge 4 brass parts at a time without flash!
Friction Srew Press – MECSPE 2020
Mecolpress will partecipate in MECSPE, at Fiere di Parma from 29 to 31 October 2020.
We exhibit the FPN 220 friction screw press.
For 19 editions MECSPE has been the greatest event focused on innovations for the manufacturing industry.
The numbers of Mecspe:
135.000 SQUARE METERS
56.498 VISITORS
2.306 EXHIBITORS
12 THEMATIC SHOWS:
360° innovation, the fair offers a complete overview of innovative materials, machines and technologies, Industry 4.0.
This event offers an interesting moment of meeting between companies, professionals and associations to build new opportunities for the manufacturing market.
Get your free admission ticket
To facilitate the visit and access safely, it is advisable to register to get the free admission ticket.
You can request it by simply filling out this form:
This ticket will allow you to access the exhibition area, participate in conferences, attend the demonstration areas and special initiatives of Mecspe 2020, and take advantage of free parking.
You can find us here:
MECOLPRESS
Hall 8 Non-ferrous materials and alloys, Stand M24.
For the 2020 edition of MECSPE, Mecolpress exhibits the FPN 220 Friction Screw Press
The screw presses like the one we bring to MECSPE are used for the hot forging of brass and steel parts, or with any type of material in general.
They are characterized by the production of solid pieces, or that require multiple forming steps.
Find out more by consulting the screw presses category on our blog.
We are therefore waiting for you at MECSPE!
MECSPE
Location: Fiere di Parma
Address: Viale delle Esposizioni, 393A – 43126 PARMA (PR)
Date: 29 – 31 October 2020 – Thursday, Friday, Saturday
Opening Hours: 9.00 – 18.00 (Thursday and Friday); 9.00 – 17.30 (Saturday)
Visitor entrances: Reception Sud, Est, Nord, Ovest
Visitor Parking: adjacent to the entrances
https://www.mecspe.com/en/magazine/
The excellence of technology applied to industry.
Biography of our hot forging blog
At the beginning of 2017 Mecolpress decided to start a blog entirely devoted to the hot forging world.
We set for it 2 goals:
- Being a reference point for hot forging companies, above all if these are first-time forgers.
- Supporting the companies having a long hot forging experience but that want to optimize their process, to better use their presses and to find answers to the necessities they meet step by step.
We have realized, doing some internet researches that it is very difficult to gather information regarding the hot forging world.
On Google you can find anything, but you will barely find suggestions or detailed deepening on hot forging!
Frequently we happen to be contacted by beginner hot forging companies, or companies having inexpert or not particularly qualified personnel (for example you can read this article) and all of these want to have further information.
We are aware that it is not possible to become expert forgers or to learn a job from Google but it is equally true that in 2020 I have to find answers on the internet to my necessities and some deepening on the topic.
Who are we?
Mecolpress is a company specialized in the production and installation of hot forging presses for brass, aluminum, copper, titanium, steel and other alloys.
Mecolpress was established in 1969, therefore we have a long forging experience and knowledge.
In our production workshop we have persons extremely expert in brass hot forging, and recently we have inserted in our staff also a steel “technologist”, we have available a mechanic and electronic technical office completely internal and a highly appreciated customer-care service.
To date we have developed and installed more than 1.950 presses at more than 400 customers all over the world, used for the forging of brass, aluminum, copper, titanium and steel.
One of the features that our customers usually appreciate most is the after sales service: the great and guaranteed material availability is added to the expertise and solid knowledge of the machines. The efficient feedback of Mecolpress lies in the largeness of the areas dedicated to the storage of parts that can be requested by the customers (we have 2 devoted warehouses) and in the investments decided exactly in favour of the “warehouse”.
Why writing a blog regarding hot forging?
At this point we said “why not sharing part of our skills online? For example, with a company from South Africa that is wondering if it’s worth it to convert his production in a hot forging system?”
“And in addition, could all the expert forgers (Mecolpress customer or not) be interested to understand if there are improvements to apply to their production? The world has changed and even fields such as the hot forging one may seem as more “static” but, as a matter of fact, they are not. If you don’t stay up to date you will lose important commissions and the quality of your work won’t evolve!
Which kind of answers will you find on this blog?
With our blog we offer ideas and tips to improve each forging process. To manage the machines and the forging lines in the best way in order to obtain the best productivity, more flexibility and less maintenance.
The topics that according to us are easier to speak on are the technical ones, thanks to the experience acquired in 50 years of activity and to our numbers, but we try to maintain a character that can be easily understood also to the less experienced companies, remaining at disposal for further in-depth detailed explanation.
In the “Case Study” category you will find for example:
- How we could help a German customer of ours to win successfully a challenge, to forge a very complex set of parts that he didn’t dare to accept as an order.
- Is it possible to reduce the gate valves costs by forging without flash? It is possible by means of ME hydraulic presses.
- Is your screw press driving you crazy? You could have disregarded what for you is just a detail, but our experience taught us that it can make the difference!
We propose solutions to problems caused by a not optimal usage of the presses or screw presses, by the inexperience; these are requests that we collect from our after-sales department. We give voice to necessities that also for expertised hot forging companies sometime can appear as complex.
A challenge we can win for our customer means for us a great satisfaction!
Remote forging test
Case study: remote forging test for the acceptance of an entire line
A few weeks ago we carried out a forging test completely on-line.
Generally, it’s the customer who comes to Mecolpress site and follows all the agreed forging tests, the complete development of the necessary activities and the forging phases of the agreed parts.
For the customer this means in any case to travel, physically being absent for some days from the office and personal business, incurring more or less important costs … in conclusion facing challenges weighed down by the situation that has developed because of Covid-19.
In order to meet the need of our customer we have ensured that the forging test for the acceptance of the entire line, that has as cornerstone our ME350 hydraulic press, was carried out totally on-line.
Therefore, we proceeded this way:
- The customer installs a software indicated by Mecolpress for a safe and certificated VPN connection.
- In this way a connection between customer internet and the press located in Mecolpress is established.
- Now the customer can access directly the machine operator panel.
4. We installed 2 video cameras, reachable by means of ip-adress, running for the whole production duration. The customer can follow the video live from any PCs.
5. Always only inside the established VPN it is possible to access through browser to the two cameras that are always on during the entire forging phase.
6. A technical support representative in Mecolpress is always and in any case available by telephone.
7. All the procedures regarding the setup phase and in particular the die changing phase are visible.
8. All the videos and pictures are therefore strictly confidential and visible from a webcam only to the customer that can save videos, if he considers it appropriate, or taking some pictures, everything always with the maximum confidentiality.
Which have been the advantages for our customer?
The advantages resulting from this acceptance-from-remote procedure of an entire hot forging line are easily identifiable:
- Time-saving,
- Costs-saving,
- Possibility that more people can follow the forging test, comfortably in front of a PC.
New procedures for remote tests
These methods of digital implementations are fundamental, but we still believe that in the world of precision mechanics and capital goods, the aspect of customer consultation is crucial and that as a result the personal contact is still necessary to carry out efficient projects according to partnership optics with the customer and to a deep understanding of his necessities.
Anyway, it is important to offer to our customers the alternative of remote forging tests. The customer experience is however total: video connections, real time data extraction, possibility to access to the press panel.
This procedure can bring also to future developments, for example, let’s think about how it can be useful if it would be set up on the contrary: a Mecolpress technician could have all the useful tools for diagnosing a problem on a machine located in Australia and solve it immediately! Without taking the plane, without taking a long journey, without charging important costs to the customers, avoiding long machine stops.
The dies lubrication determines your forging success!
Knowing to take advantage of the correct dies lubrication is crucial in a hot forging system of brass, steel, aluminum, titanium or copper parts.
We have already highlighted many times in our previous articles how the lubrication can make the difference and solve many of the common problems that the forgers observe during the production of their forged parts. Our research of the perfect lubrication has evolved, becoming more and more precise and customizable, exactly like we are constantly required by the market.
A correct lubrication doesn’t mean that it must be of large quantity, but that it must be correctly dosed and the most appropriate lubricants must be chosen according to the metal types and required part to be forged.
The dies lubrication system of hydraulic presses of ME series and of eccentric press at continuous cycle of HEAVY series
With the hydraulic presses of ME series and the mechanical eccentric at continuous cycle presses of HEAVY series we have revolutionized the dies lubrication system:
- We drag the outgoing oil+graphite mixture on the lubrication point.
- We let the lubrication liquid and the compressed air flow in two concentric tubes of the control valves of the single points up to the usage point.
- For each of the points the pilot is independent and therefore for each of them we give the possibility to the user to choose from the operator panel how, when and how often to intervene.
But we were not satisfied yet!
Which are the requests the forgers most frequently address to us?
We have verified that some of the questions you ask our service department are regarding the lubrication system:
“My die has broken, what can I do to guarantee it a long-lasting life?”
“The dies lubrication system I am using is not satisfying.”
“Is it possible to reduce the waste of lubricants, in view of an even more ecological choice?”
“How can I obtain a successful forging system?”
Our Research and Development team has therefore perfected and developed a new lubrication system.
What’s new in the lubrication system of the HEAVY series
Heavy series is our new proposal of a mechanical eccentric at continuous cycle press. It is a very revolutionary machine, the result of 50 years of experience in the hot forging presses production, and of the continuous search for innovation and technology perfection.
As a result, we have completely reviewed even the automation and the dies lubrication.
First of all, the dies lubrication system allows for each single point the independent and programmable management.
It is possible to start the lubrication cycle in different ways: during the ascent or descent of the ram, during the loading or unloading cycle, with appropriate delay and duration times.
Each point can be used for the nebulization of the lubricant or for the cooling and cleaning of the dies.
The system can be implemented with 2 or more high capacity air blowing points.
It is possible to program the schedules: the pumping circuit, the automatic mixer and the heating resistance placed in the tank allow to prepare the liquid and the entire circuit for the starting time at optimal conditions.
The nebulization of the lubricant, thanks to the particular pipe system, is obtained only in proximity of the usage area: in this way the dosage, repeatability and the sensibility to the dosage variation are guaranteed.
40 lubrication/cooling points are foreseen, of which 16 are placed in the lower dies-holder and 16 in the upper dies-holder. The disposition of the lubrication/cooling points throughout the dies allows to reach efficaciously the critical points to be lubricated/cooled, in addition to drastically reduce the times of production change.
Reactive, smart system for creating your recipes
The responsiveness to the settings variations is immediate, unlike the traditional system that requires several minutes of production before it stabilizes.
In addition to this, we can have a strong blowing without the help of compressors (that are contributing to increase the consumptions and the general maintenances of the plant).
A smart software system helps moreover the operator to adapt automatically the dosage of the lubricant in the startup phase of the production, till to reach the correct forging conditions.
Our system can be adapted even to the use of lubricant/water-base release agent, e.g. used in the aluminum sector, that are different from the classic graphitized oil.
All the parameters, activation of the used points, start modalities, timers and counters, once they have been optimized, are saved in the recipe devoted to the type of the part to be produced, in order that for the following batches of the same article there is a fast production start without useless waste of time.
HOT FORGING PRESSES INTERVIEW WITH MECOLPRESS
Company manufacturing hot forging presses.
We report an interview of the digital magazine Easy Engineering of 28 April 2020.
Established in 1969, MECOLPRESS was founded as a manufacturing company of mechanical presses for brass components hot forging. Up to today, Mecolpress has developed and installed more than 1.950 presses, at over 400 customers all around the world, used for forging brass, aluminum, copper, titanium, steel. The current production site in Flero, in the highly productive area of Brescia, takes up a 30.000 square meters surface, 10.400 of them are covered and employees 55 people, reaching a turnover in 2018 of 11.5 million Euro.
In 2019, in occasion of EMO exhibition in Hannover, Mecolpress officially presented the new series of continuous and discontinuous cycle eccentric presses, the HEAVY series.
Easy Engineering: What are the main areas of activity of the company?
MECOLPRESS: At the beginning all efforts were concentrated on brass hot forging field; in the time, also through the acquisition of the historical brands Osterwalder and Dellavia in the screw presses section, the variety of machines that we design and produce is now so wide and complete to satisfy the most different requirements of the customers: for each specific material, shape and quantity to be forged, we are in the position to offer the most suitable solution.
Mecolpress is today the only company among the manufacturers of presses for the hot forging of brass, aluminum steel, copper, titanium, with a so complete production program.
Our present production program consists of:
- TDS: direct drive with electrical servomotor;
- Dellavia and Osterwalder: Traditional disc friction.
PG Knuckle joint presses
for calibration and coining of parts.
Presse Meccaniche Eccentriche
- SOV and SEO/F: for the vertical hot forging;
- SEO and HEAVY: for forging with horizontal cores, in single or continuous cycle.
for forging brass and aluminum parts without flash.
- PO: single station;
- S: multiple station, rotary table with hydraulic motor;
- E: multiple station, rotary table with electric motor.
In addition, Mecolpress is particularly active in after-sales service. The heart and pride of Mecolpress is its large spare parts warehouse, which is able to supply accessories or spare parts for machines produced fifty years ago. For this reason, in addition to the sale of machinery, there is a wide activity related to the service and supply of accessories (such as tools, arms, spare parts, etc..).
E.E: What’s the news for 2020 about new products?
MECOLPRESS: At the end of 2019 Mecolpress presented at EMO fair in Havvore a brand-new series of eccentric presses, named HEAVY, which defines a new standard for the hot forging of brass.
A machine concept that offer highest durability and reliability together with an innovative software system that allows the maximum control on the process and the a very easy operation.
E.E: What are the ranges of traded products?
MECOLPRESS: As a manufacturer with an own wide range of products, the additional equipment that we simply trade is limited to ancillary machines, to offer complete forging lines (delivering a finished part from the input of a raw material bar) to those customer that prefer to have a turn-key plant from one source.
Typical traded machines are: billets heating furnaces, forging dies, sand blasting machines.
E.E: At what stage is the market where you are currently active?
MECOLPRESS: Since our machines are dedicated to a very wide panorama of applications (from house building to automotive, from gas control to biomedical) there are always new developments in these sectors.
This is for us very stimulating because we are constantly involved in the design of new solution, to support our customers with the most suitable equipment to manufacture parts that are chancing in the shapes, in the alloys and in the technical requirements.
E.E: What can you tell us about market trends?
MECOLPRESS: In the past our customers were mainly subcontractors, producing many different kinds of parts for the most differentiated OEMs. We see now more and more companies that are interested in bringing back into their own activity the hot forging process, to have full control over the entire production line. And also, the subcontractors that still exists, are increasing in size, in capability, and in specialization: they are requested to be much more accurate, reliable, more flexible and fast in changing production and technologies.
For these reasons, the machines that both our customer types (the subcontractors and the OEMs) need, are machines that can easily switch from one application to the next, and that can record and control really in depth every aspect of the production process. The user is therefore becoming more an engineer, that study and program the process in advance and then let the machine run autonomously, instead of an operator that has to stay full time at the machine, checking and adjusting the settings.
E.E: What are the most innovative products marketed?
MECOLPRESS: As above indicated, one of the most innovative products that we offer today is the new range of Heavy presses.
In parallel to this, we are widening the offer for the ME hydraulic presses which are designed to forge net shape parts. These machines are extremely versatile, can communicate in two directions with the company ERP software to exchange production data, recipes, preventive maintenance information. And are also able to automatically detect a non-conforming product and separate it from the good ones. This makes the ME forging presses a fully automatic system, that does not require operators to work but also does not need regular presence of quality control staff to check periodically the output.
E.E: What estimations do you have for 2020?
MECOLPRESS: At the end of 2019 we planned a very aggressive budget of sales for the 2020, and supported it with several activities and strategies, from the participation to many international shows, to the production of machines for stock, to grant to our customer very fast deliveries.
Unfortunately, due to the Covid-19 virus spreading, many commercial activities had to be reprogrammed or postponed. We are now investigating the world markets to assess what will be the customers’ propensity to invest for the remaining months of this year. We are very optimistic that we will in any case be able to reach most of our targets also thank to the availability of machines in our workshop, which is allowing us to complete deliveries in this year of machines ordered in the second and third quarter.
THE PRESS AUTOMATICALLY SEPARATES THE FORGED PARTS: GOOD IN ONE BOX, BAD IN ANOTHER!
Differentiated unloading of the forged pieces
The press automatically separates the forged parts and divide them into different boxes. The press has become intelligent!
The differentiated unloading of the forged parts is an interesting function that Mecolpress provides by default on all hydraulic presses, but it can also be added as an option on eccentric mechanical presses.
Hot forging for higher quality of forged parts
The metal hot forging differs from the cold one because it allows you to obtain high quality pieces through an important deformation of the starting material. By working brass, copper, titanium, steel and aluminium by means of hot forging presses, in fact, it is possible to produce particular shapes, even with complex geometries.
The metal hot forging therefore allows to obtain parts that are more resistant than those obtained through other production processes.
In particular, metal hot forging can increase the strength and resistance of the products. For these reasons, the production of hot forged pieces guarantees specific advantages in their mechanical characteristics compared to those produced with other technologies such as casting or mechanical machining with chip removal.
The hot forging, compared to the casting processes, allows to obtain mechanical characteristics and surface appearance of superior quality. We at Mecolpress know it well, so much that we have made “Technology of Shape” our motto.
The piece produced must therefore be perfect, its quality must be certified. For this reason, Mecolpress has designed a system that allows the press automatically separates the perfect forged parts from those to be evaluated as they may not be such.
Why is it so important that the press separates the perfect forged parts from those to be evaluated?
From the automotive sector, the Lean production method teach us:
- Companies can be competitive on small production batches (producing only what is necessary) instead of manufacturing high quantities at low prices, with the risk of keeping high stock levels, are rewarded with success.
- The second must of the “Lean” work methodology is the zeroing of the waste and dispersions, or in other words, of the useless productions because of defected parts.
One of the most recurring needs in our customers is to have an ever more intense control of the forging process: the machine must be able to control as many parameters as possible important for the forging process, record them to make statistical predictions on the deviation from the optimal production, carry out checks.
Mecolpress offers a series of forging presses that fully meet the needs described above: the ME hydraulic series.
The hydraulic presses can control numerous process parameters and on these manage the logic for rejects or collect the measured values for statistical analysis. For example, they can control:
- the temperature of the billets to be loaded,
- the coring punches penetration time,
- the punches real penetration force,
- the final position reached by each punch.
Here you can learn more about the most important process parameters that hydraulic presses are able to evaluate.
The machines of the ME series have the credentials to be competitive in a modern and controlled forging field; they operate at their best on medium / small batches, thanks to their flexibility.
In this video we show how our hydraulic presses perform the differentiated unloading of the forged parts:
The pieces that do not fully comply with the process parameters set by the operator and analysed by our powerful Calipso software to control the forging process, are unloaded in a separate bin.
For the customer this operation translates into an important saving method:
- Less waste of time,
- Less material / pieces to be discarded,
- Be sure that the forged piece complies with the required characteristics,
- Get perfect shapes.
Another company based in Brescia chooses Mecolpress hydraulic presses.
With regularity and continuity, Mecolpress gains new Italian customers, the hydraulic press is confirming to be the winning choice.
Case Study: How we acquired the latest customer from Brescia
We report the case of a new customer based in Brescia that we have just acquired, an interesting case study to understand which are the necessities of the companies working in the hot forging sector and how Mecolpress provides answers.
It is the case of a company established in the international market for the very high quality of its production, consisting mainly of mini valves, valves and fittings for the sanitary and heating sector. This company has its own brass hot forging department, developed to cover the 100% of the forged parts needs; the recourse to very few and highly selected external suppliers happens just in case of particular peak of volumes.
The presses equipment of this company consists of 5 machines, always full of work: 3 more traditional and “dated” (eccentric mechanical presses of the historic producer Rovetta, that now no longer exists) and two more recent little hydraulic presses of a particular type, proposed by an European producer.
Knowing better the company, now customer of us, we could appreciate right from the beginning some undisputed features:
- Advanced transfer machines;
- A working method focused on the precise and deep knowledge of all the productive processes;
- A forward-looking vision on the continuous training of all the personnel that is involved with the management regarding the strategic decisions and that creates a uniform a close-knit group;
- A quality department having knowledge, methodologies and instruments not only for the examination of the parts but also for the evaluation of the method used for their production.
During various meeting both at customer’s and Mecolpress site, we had the opportunity to present them our complete range of presses and in particular the functionalities of our hydraulic presses of ME series.
Mecolpress method
The customer wanted to test us, taking advantage of the Mecolpress strategy of having a selection of presses almost ready for delivery, for carrying out forging simulations with two parts of their production range on the specific press of their interest.
The result was that, thanks to the constructive collaboration of both teams (the customer and the Mecolpress ones), in just 9 weeks from the decision of beginning with the simulations, we could:
- Carry out the forging simulations of the two parts to be tested;
- Manufacture the related forging dies;
- Carry out forging tests with two dies (in manual and in automatic cycle, since Mecolpress has 2 high-performing push-type gas furnaces;
- Dismantle and demolish one of the old presses of the Customer;
- Deliver at customer site in Brescia a new ME150/4G62 hydraulic press, exactly the same one the customer saw and tried.
Why the company under consideration chose Mecolpress?
We thank the customer for the trust and for having tested us, and we are particularly proud that even they, as other customers, after having bought and used the hydraulic presses of our competitors, have chosen to purchase Mecolpress for the future.
The decisive points for this new positive result are in short:
- Mecolpress can offer to the customer not only any kind of new presses, but also exceptional expertise in the maintenance of old presses, of other manufacturers (in this case Rovetta).
- Mecolpress hydraulic presses, both for mechanical and construction project and for extremely developed software, offer to the user an incomparable ease and usage flexibility.
- Choosing Mecolpress, the possibility to conclude an investment in very short time, and to see it becoming rapidly productive; who wants to invest has no time to wait and must be helped to be competitive as soon as possible!